DTN-100KVAE (Popularity:5)

Prev： DTN-63KVAE

Next： DTN-150KVAE .

Share：

Name：DTN-100KVAE

Type：

Focus on resistance welding machine for 27 years

National High-Tech Enterprise

Joint industry resources, achievement industry elite

High quality, high value, high cost performance

The whole machine is guaranteed for one year, and the transformer is replaced for five years.

Features:

1. Epoxy cast copper transformer with low loss and large output

2, T-shaped structure of the upper and lower arm, good rigidity and less deformation

3, oil-water separator built-in structure to reduce transport damage

4. High-speed pressurized cylinder head for higher speed welding

5, microcomputer controller, can meet a variety of welding processes

E series spot welder technical parameters

Model	DN-35KVAE	DTN-63KVAE	DTN-100KVAE	DTN-150KVAE
Rated Capacity	35KVA	63KVA	100KVA	150KVA
Input voltage	380V Two phase	380V Two phase	380V Two phase	380V Two phase
Rated frequency	50HZ	50HZ	50HZ	50HZ
Maximum short circuit current	13KA	17KA	26KA	32KA
Maximum input power	49KVA	88KVA	187KVA	268KVA
Load continuation rate	10%	10%	10%	10%
Welding head to the fuselage	380mm	380mm	380mm	380mm
Maximum pressure	2500N	3900N	6100N	6100N
Cylinder stroke	60mm	80mm	100mm	100mm
Projection soldering station size	none	110×130mm	120×135mm	120×135mm
Projection soldering station	220mm	220mm	220mm	250mm
T slot center distance	none	80mm	80mm	80mm
Electrode arm	Φ44	Φ54	Φ64	Φ64
Electrode grip	Φ20	Φ25	Φ30	Φ30
Electrode head	Φ13	Φ16	Φ20	Φ20
Welding ability	1.5+1.5mm	2+2mm	3+3mm	4+4mm
Cooling water flow	≥3L/min	≥4L/min	≥5L/min	≥5L/min
Weight	145KG	215KG	285KG	325KG
Dimensions	860×400×1480mm	920×510×1540mm	970×560×1710mm	920×720×1730mm