Search

DN-35KVA (Popularity:6)

Prev： DN-20KVA

Next： DTN-63KVA

Share：

Name：DN-35KVA

Type：

Focus on resistance welding machine for 27 years

National High-Tech Enterprise

Joint industry resources, achievement industry elite

High quality, high value, high cost performance

The whole machine is guaranteed for one year, and the transformer is replaced for five years.

Features:

1. Epoxy cast copper transformer with low loss and large output

2, T-shaped structure of the upper and lower arm, good rigidity and less deformation

3, oil-water separator built-in structure to reduce transport damage

4. High-speed pressurized cylinder head for higher speed welding

5, microcomputer controller, can meet a variety of welding processes

Power frequency spot welding machine technical parameters

Model	DN-35KVA	DTN-63KVA	DTN-100KVA	DTN-150KVA
Rated Capacity	35KVA	63KVA	100KVA	150KVA
Input voltage	380V Two phase	380V Two phase	380V Two phase	380V Two phase
Rated frequency	50HZ	50HZ	50HZ	50HZ
Maximum short circuit current	16KA	25KA	32KA	38KA
Maximum input power	83KVA	180KVA	268KVA	368KVA
Load continuation rate	20%	20%	20%	20%
Welding head to the fuselage	380mm	380mm	380mm	380mm
Maximum pressure	2500N	3900N	6100N	6100N
Cylinder stroke	60mm	80mm	100mm	100mm
Projection soldering station size	none	110×130mm	120×135mm	120×135mm
Projection soldering station	220mm	220mm	220mm	250mm
T slot center distance	none	80mm	80mm	80mm
Electrode arm	Φ44	Φ54	Φ64	Φ64
Electrode grip	Φ20	Φ25	Φ30	Φ30
Electrode head	Φ13	Φ16	Φ20	Φ20
Welding ability	2+2mm	3+3mm	4+4mm	5+5mm
Cooling water flow	≥3L/min	≥4L/min	≥5L/min	≥5L/min
Weight	165KG	245KG	315KG	410KG
Dimensions	860×400×1480mm	920×510×1540mm	970×560×1710mm	970×560×1800mm